Unlisted

BIPOLAR AMPLIFIERS

  • XR-500: With toroidal mains transformer, delayed turn-on, forced air tunner cooling and stereo/mono switch, this amplifier has a 160 watts power at 8 oms and 250 watts per channel at 4 oms both channles working, and 500 watts at 4 oms in mono/bridge.
  • XR 1000 : With toroidal mains transformer, delayed turn-on, thermally controled fan cooling and stereo/mono switch, this amplifier has a 300 watts power at 8 oms and 500 watts per channel at 4 oms both channels working, and 1000 watts at 8 oms in mono

AMPLIFIERS MOS-FET

  • MF-150 : With  ¼ jack input connectors and XLR, convention air cooling using heatsinks, stereo/mono switch and calibrated variable input attenuators in dbs, this amplifier has a 50 watts power at 8 oms and 80 watts per channel at 4 oms both channels working, and 150 watts at 8 oms in mono

MF 1200 539x255

  • MF-300 : With XLR input connectors, forced air cooling, stereo/mono switch and calibrated variable input attenuators in dbs, this amplifier has a 100 watts power at 8 oms and 155 watts per channel at 4 oms both channels working, and 300 watts at 8 oms in mono.
  • MF-600 : With XLR input connectors, forced air cooling, stereo/mono switch and calibrated variable input attenuators in dbs, this amplifier has a 190 watts power at 8 oms and 310 watts per channel at 4 oms both channels working, and 600 watts at 8 oms in mono.
  • MF-800 : With XLR input connectors, forced air cooling, stereo/mono switch and calibrated variable input attenuators in dbs, this amplifier has a 250 watts power at 8 oms and 410 watts per channel at 4 oms both channels working, and 800 watts at 8 oms in mono.
  • MF-1200 : With XLR input connectors, forced air cooling, stereo/mono switch and calibrated variable input attenuators in dbs, this amplifier has a 375 watts power at 8 oms and 610 watts per channel at 4 oms both channels working, and 1200 watts at 8 oms in mono.
  • MF-1600 : Mos-fet amplifier with soft-clipping limiter, thermally controlled frontal/rear cooling, stereo/mono switch and calibrated variable input attenuators in dbs, this amplifier has a 480 watts power at 8 oms, 820 watts at 4 oms, and 1050 watts at 2 oms per channel both channels working, 960 watts at 4 oms and 1300 watts at 2 oms in bridge.It also has an independent power supply per channel, multiple protection systems, and internal sensitivity adfjustment.

MF 1600 581x213


CROSSOVERS

  • FA-224 : With 2 stereo switchable ways to 3 and 4 mono ways and  24 db/octave Linkwitz-Riley filters, they not only separate the signal in different bands, but they also incorporate a limiter in each band adjustable between -7 and +7 db, mute and phase change for each band.
  • FA-324 : With 2 and 3 stereo switchable ways to 4, 5, and 6 mono ways and  24 db/octave Linkwitz-Riley filters, they not only separate the signal in different bands, but they also incorporate a limiter in each band adjustable between -7 and +7 db, mute and phase change for each band.

GRAPHIC EQUALISERS

  • EQ-152 : With 15+15 bands, it owns constant Q filters and +-12 db low interaction, a precise equalization, minimum residual noise, and secure bypass system when the power is disconnected.High and low pass filters variable between 20-350 hz and 2k-40k.
  • EQ-301 : With 30 bands, it owns constant Q filters and +-12 db low interaction, a precise equalization, minimum residual noise, and secure bypass system when the power is disconnected.High and low pass filters variable between 20-350 hz and 2k-40k.

EQ 301 530x130


DISK MIXERS

  • MZ-6 : The basicly have 9 inputs, 5 stereo channels+1 DJ channel, 3 line/micro channels with premixing, bass,treble balance control in Master, but also double recording and master output, and eco section with level, foldback, delay and switch mix/DJ.
  • MZ-4 : The basicly have 6 inputs, 4 stereo channels, 2 line/micro channels with premixing, bass,trebel balance control in Master, but also recording and master output.

ACOUSTIC BOXS

  • PA-250 : Designed for music aplications, offering a high performance( 100 db SPL),  a robust finish, ( lateral handles, loudspeakers protective grill, XLR connectors PCB, plastic corner pieces, and optional bar support), and a reduced volume ( 670x550x330 mm); it comes also with  a 2x10" low loudspeakers , and highs with 1" motor with exponential blow-drier, 10-250 W RMS amplifier´s power, and  4 oms nominal impedance.
  • CX-150 : High performance ( 98 db SPL), reduced and compact format ( 590x400x320), polished in natural and varnished wood, and also with a brilliant and spectacular sound, with a 10-150 W RMS amplification power, a  8 oms nominal impedance, and low loudspeakers with a 12" woofer, and in highs a 1" concentric tweeter with the woofer.
  • DC-300 : With a 10-300 W amplification power, 8 oms nominal impedance, 1x15" low loudspeakers and 1x1"highs with constant directivity blow-drier, it is specially concieved for big sonor pression aplications and big power capacity.PA 250 CX 150 DC 300 706x397

COMPRESSOR/ LIMITER/  ESSER

  • CL-532 : Precision technology of VCA´s, treshold level from  -40 to +20 db, compression ratio 1:1 to  :1, total distorsion better than 0,05%(20 db gain reduction), and automatic attack and release times.

INTERCOMS

  • INTERCOM MASTER STATION EF-100: It's devised as a central unit, with two communication channels. It can work in DUAL mode, swithching between A and B channel, and as well in A+B mode, communicating one operator with all remote units. Each channel incorporates its outputs to feed remote units, through standard microphone lead; 4 pins XLR connector for headset; outputs by channel in XLR connectors, in front and rear pannels. The calling system has a push-buton with flash light and acoustic warning, swicht to disable the acoustic warnig and potentiometter to adjust headphones level;
  • INTERCOM REMOTE STATION EM-100: It's devised as a mobile unit, feeded from the central EF-100, provided of input/output in XLR connectors, to link with the central unit and to chain with another remote one; headset output with XLR 4 pin connector; dinamic compressor and cancellation circuits (side tone); calling system with optic and acoustic devices by flashing push-button and intermitent buzzer; switch to disable the acoustic warning; switch to disable headset microphone; headphones volume pot. High load impedance, allows to chain in parallel 10 remote units per channel=20 remote units, whose can be linked to only one central station.
  • INTERCOM DESKTOP STATION ES-100: It's devised as a remote unit that is powered by the EF-100 central station.Provided with connection for a swan's neck microphone, in XLR micro standard, and a wide band speaker,that operates with a special cancellation system, wich allows hands free talking to the rest of the units that are connected with. In order to reduce general background noise on the line, the unit has an ON/OFF microphone switch, with "push to talk" operation, that switches momentarily in order to talk.As all the E-100 series, the ES-100 includes a call button with flash light and intermitent acoustic buzzer (with switch to be disabled when it's required), that keeps warning for an automatic period of 2 seconds. The unit can be placed in desktop position, attached to a wall and as well on a rack hook-up, with the help of two optional pannel supports.

SecartysLogo      Logo AfialPeq      Logo Avixa      Innovative Sme Logo

Copyrights © ALTAIR. Todos los derechos reservados.